Granite 3 line House Sign 23 x 20.5cm

Granite 3 line House Sign 23 x 20.5cm

A contemporary twist on a traditional house sign. Use this modern font or choose something more your taste. Either way you’ll have yourself a stylish house sign to welcome your guests to your home. 

Your choice of wording will be sandblasted into the granite leaving a textured finish and hand painted in your choice of infill colours. The text on the sign can be upper or lower case, just simply type in the boxes below as you would like the text to appear. A range of fonts and infill colours are available to choose from.

Extra information: 

• 4 infill colours to choose from 
• A range of fonts are available
• Optional border designs available
• Manufactured using 10mm granite 
• Pre – drilled with 4 holes

Fixing your house sign to any structure using standard fixings

• Measure the correct distance on the structure and mark out with a pencil 
• Using a 5mm masonry drill bit, drill 4 holes in your wall, in the correct position and insert the rawl plugs 
• Using the screws provided, fix the number to the structure, but be careful not to tighten the screws too much as the acrylic may split. 
• Fix the dome caps to the screws Fixing our house sign to any structure using hidden fixings 
• Our craftsmen will drill 4 holes half way through the back of the slate. 
• Metal rods and glue are supplied with your product for fixing. 
• Using the glue provided, insert the metal rods securely to the back of the slate 
• Measure and drill using a 5mm masonry drill bit to the size required and insert the rawl plugs provided. 
• Fill the hole in the wall with sealant. (we recommend normal bathroom sealant) 
• Slot the slate product onto the wall until secure. 

For best results use a 5mm masonry drill bit, a tape measure, a spirit level and a screw driver. Your house number may need cleaning periodically, simply wipe with a soft damp cloth, avoid using abrasive cleaners, as this could damage your product. If you have any trouble, see our handy “how to video” below for a visual guide.

Fixing our house sign to any structure using hidden fixings

• Our craftsmen will drill 4 holes half way through the back of the slate.
• Metal rods and glue are supplied with your product for fixing.
• Using the glue provided, insert the metal rods securely to the back of the slate
• Measure and drill using a 6mm masonry drill bit to the size required and insert the rawl plugs provided.
• Fill the hole in the wall with sealant. (we recommend normal bathroom sealant)
• Slot the slate product onto the wall until secure.

For best results use a 5mm masonry drill bit, a tape measure, a spirit level and a screw driver.

VIDEO GUIDE

Fitting Your house sign

How to fit your hidden fixings